This 2003 American Champion 8-GCBC Scout, registered as N103BC, presents a very low-time airframe with 850 hours total time, matched by its 850-hour SNEW Lycoming O-360-C1G engine. The aircraft features a 450-hour SNEW MTV-15-B MT propeller, which was overhauled, repainted, and reinstalled in October 2023. Its useful load is 800 pounds, enhanced by an Airglas cargo belly pod installed in May 2025, which adds significant storage capacity. The airframe was completely recovered and custom painted in November 2014 following fabric dimpling from a hail event, resulting in what the seller describes as a 10/10 exterior, and it features a 10/10...
GPS
Garmin GTN 750
PFD
Garmin G5 PFD - Two Primary Attitude/DG HSI, with
Audio
Garmin GMA 35 - audio panel
ADSB
Garmin GTX 345 - Remote ADS-B In/Out transponder
ADS-B In
Garmin GTX 345 - Remote ADS-B In/Out transponder
EMS
Electronics International CGR-30R - Single digital multi-function (EI) Primary Engine and Aircraft System Instruments, interfaced with GTN750 to receive GPS and FF data
Cargo Pod
Airglas Cargo Belly Pod - New installed 5/25. 337 STC complied. Adds 94 pounds to 30 pounds in extended rear fuselage bay in addition to 100 pounds in compartment for total 224 pounds of gear in addition to pilot passenger
Tail Wheel
Shimmy dampener on tail wheel. Makes landing rock-solid on all surfaces and configurations
Heating System
Heated pitot and engine oil pan. Heated stall warning and pitot tube
Covers
New cowling air intake padded covers and new full cabin cover by Bruce included
Tires
Goodyear 26" Tires
Asking Price
$225,000
Jacksonville, OR, USA
Jan 19, 2026: $225,000 - trade-a-plane
Asking Price
$225,000
Jacksonville, OR, USA
Jan 19, 2026: $225,000 - trade-a-plane
Quick filters • Updated daily
Find the perfect American Champion Scout for you. Browse over 5,000 aircraft for sale and filter by specifications, avionics, useful load, and more...
Find the perfect American Champion Scout for you. Browse over 5,000 aircraft for sale and filter by specifications, avionics, useful load, and more...
Asking Price
$225,000